4.9 ExpressCard slot 4 Replacement Procedures
PORTÉGÉ R830/Satellite R830 Maintenance Manual (960-880) [CONFIDENTIAL] 4-29
4.9 ExpressCard slot
Removing the ExpressCard slot
To remove the ExpressCard slot, follow the steps below and refer to Figure 4-15.
1. Remove the following screws securing the ExpressCard slot.
• M2×4C S-THIN HEAD screw ×2
• M2×3B S-THIN HEAD screw ×2
2. Peel the EXP Card FPC from the D-stick tape and remove the ExpressCard slot
from the base assembly.
Figure 4-15 Removing the ExpressCard slot
M2x4C S-THIN HEAD
M2x3B S-THIN HEAD
ExpressCard slot
EXP Card insulator
D-stick tape
EXP Card FPC