Toshiba Portege R830 - Removing the System Board (2)

4.18 System board 4 Replacement Procedures
PORTÉGÉ R830/Satellite R830 Maintenance Manual (960-880) [CONFIDENTIAL] 4-55
Removing the System board
To remove the system board, follow the steps below and refer to Figure 4-32 to 4-37.
1. Peel off the acetate tape.
2. Turn up the insulator and take out the RJ45 harness from the slot.
Figure 4-32 Removing the system board (1)
RJ45 harness
Insulator
Acetate tape