4 Replacement Procedures 4.24 Cover assembly/LCD assembly
4-80 [CONFIDENTIAL] PORTÉGÉ R830/Satellite R830 Maintenance Manual (960-880)
4.24 Cover assembly/LCD assembly
Removing the Cover assembly/LCD assembly
To remove the cover assembly/LCD assembly, follow the steps below and refer to Figure 4-
49 and 4-50.
1. Open the display 90 degrees and put the computer on the stand.
2. Turn up the insulator.
3. Remove the following screw and separate the cover assembly and LCD assembly.
• M2.5×4B FLAT HEAD ×1
Figure 4-49 Removing the cover assembly/LCD assembly
LCD assembly
M2.5x4B FLAT HEAD
Cover assembly
Insulator
To Next Page
Loading...
