4.23 Keyboard 4 Replacement Procedures
PORTÉGÉ R830/Satellite R830 Maintenance Manual (960-880) [CONFIDENTIAL] 4-79
Installing the Keyboard
To install the keyboard, follow the steps below and refer to Figure 4-48.
1. Stick a new insulator (KB INSULATOR) on the cover assembly.
2. Peel off the separator of the insulator (KB INSULATOR).
NOTE: When sticking an INSU KB to COVER ASSY, refer to the following figure.
3. Stick a new keyboard on the insulator.
4. Stick the aluminum tape (AL TAPE) on the back of the cover assembly.
NOTE: When sticking an AL TAPE, refer to the following figure.
To Next Page
Loading...
