4.28 Hinge 4 Replacement Procedures
PORTÉGÉ R830/Satellite R830 Maintenance Manual (960-880) [CONFIDENTIAL] 4-119
4.28 Hinge
Removing the Hinge
To remove the hinge, follow the steps below and refer to Figure 4-58.
1. Remove the following screws securing the hinges.
• M2×5B S-THIN HEAD ×2
2. Remove the hinges (right and left) and key plate from the LCD cover.
Figure 4-58 Removing the hinge
Installing the Hinge
To install the hinge, follow the steps below and refer to Figure 4-58.
1. Set the key plate and hinges (right and left) to the LCD cover, and secure them with
the following screws.
• M2×5B S-THIN HEAD ×2
Hinge (L)
Hinge (R)
M2x5B S-THIN HEAD
M2x5B S-THIN HEAD
LCD cover
Key plate
To Next Page
Loading...
