4.19 Sound board 4 Replacement Procedures
PORTÉGÉ R830/Satellite R830 Maintenance Manual (960-880) [CONFIDENTIAL] 4-67
Installing the Sound board
To install the sound board, follow the steps below and refer to Figure 4-38 to 4-41.
1. Turning up the insulator, arrange the inner harness in place and fix it with the
insulator.
2. Stick the acetate tape in place.
3. Set the sound board to the slot of the cover assembly and secure it with following
screw.
• M2×3B S-THIN HEAD ×1
4. Connect the camera harness, sensor harness, speaker harness and inner harness
to the connector CN9540, CN9620, CN6000 and CN6050 on the sound board.
To Next Page
Loading...
