4.20 Speaker 4 Replacement Procedures
PORTÉGÉ R830/Satellite R830 Maintenance Manual (960-880) [CONFIDENTIAL] 4-71
Installing the Speaker
To install the speaker, follow the steps below and refer to Figure 4-42 and 4-43.
1. Set the speaker to the slot of the cover assembly.
2. Turn up the insulator and arrange the speaker harness in place.
3. Set the speaker holder L to the slot and secure it with following screw.
• M2.5×6B FLAT HEAD ×1
4. Arrange the wireless LAN antenna cable in place.
5. Close the insulators.
To Next Page
Loading...
