–9–
Owner’s Manual
■ Air to Air Heat Exchanger main screen
Displayed when Air to Air Heat Exchangers are connected. This screen is for monitoring the state of the air and for
setting the ventilation fan speed and ventilation mode.
You can check the current state according to the setting items on the bottom of the screen.
You can switch the setting items by pressing [ ] and [ ], and change them by pressing [ ] and [ ].
*1: Indoor temperature
*2: Indoor humidity
*3: Supply air temperature
*4: Outdoor temperature
• The “Ventilation monitor” screen is the main screen.
• Functions and items that cannot be set are not shown, according to the model.
• While changing settings, if you press [ Return] or if there are no button operations for about 60 seconds, the main screen
returns.
Setting items
• The currently selected item is highlighted in black.
• You can switch the items by pressing [ ] and [ ].
(*3)
(*4)
(*1)
(*2)
“ Preparing to operate ventilation”
Displayed while the air to air heat exchanger is on standby.
While this is being displayed, the air to air heat exchanger remains stopped.
To Next Page
Loading...
