–10–
Owner’s Manual
EN
■ Icon list
▼
Air conditioner
*1: Refer to the Installation Manual of the Wired remote controller.
▼
Air to Air Heat Exchanger
• Displayed only when Air to Air Heat Exchangers are connected.
• For details on the ventilation function, refer to the Owner’s Manual of the Air to Air Heat Exchanger.
Displayed when “Energy saving operation” is
“ON”.
(Page 39)
Displayed when “Timer” is “ON”.
(Page 23, 27)
Displayed when remote controller sensor is set.
(*1)
Displayed when “Louver lock” is set.
(Page 22)
Displayed when “Night operation” is “ON”.
(Page 34)
Displayed when it is time for filter maintenance.
(Page 35, 60)
Displayed when operations are locked by
central control. (*1)
(Page 55)
Displayed when “Soft Cooling” operation is
“ON”.
(Page 50)
Displayed when “Saving operation” is “ON”.
(Page 43)
Displayed for about 3 seconds when the
operation mode is changed in the “Mode”
screen when the operation mode is restricted.
Displayed when the Bluetooth
®
function is
“ON”. Refer to the Owner’s Manual of the
Bluetooth
®
function regarding Bluetooth
®
functions.
Displayed when “Air purifier” function is “ON”.
(Page 58)
Displayed when a check code occurs. (*1)
Displayed when a notice code occurs. (*1)
For details, contact your dealer.
It reaches the set temperature, and displayed
while the room temperature is maintained.
It is displayed when a commercially available
ventilation unit connected to the air conditioner
is in operation.
Automatic 24-hour ventilation
Bypass Nighttime heat purge
Heat exchange
To Next Page
Loading...
