4 Replacement Procedures 4.12 Speakers
4.12 Speakers
Removing the Speakers
Remove the Speakers according to the following procedures and Figure 4-16.
1. Disconnect the LCD/FL cable from CN6 on the system board.
2. Disconnect the speaker cable from CN601 on the system board.
3. Remove two M2x3 black flat head step screw securing the left speaker.
4. Remove two M2x3 black flat head step screws securing the right speaker.
5. Remove the left and right speakers.
CN601
Speaker cable
Left speaker
Right speaker
CN6
LCD FL cable/
M2x3 black flat
head step screw
Figure 4-16 Removing the speakers
4-34 Satellite/Satellite Pro/A500/A505/A507/dynabook Maintenance Manual
To Next Page
Loading...
