4 Replacement Procedures 4.21 Slot ODD Module
Bracket
M2x3
flat head screwblack
ODD bay module
Figure 4-35 Removing the bracket from the ODD drive
Assembling the ODD Drive
Assemble the ODD drive according to the following procedures and Figure 4-34 and 4-35.
1. Seat the bracket and secure it with two M2x3 black flat head screws.
2. Place the slot ODD bezel in the correct position and secure the following 6 latches, in
that order:
- One latch on right sides.
- Two above latches.
- Two below latches.
4-58 Satellite/Satellite Pro/A500/A505/A507/dynabook Maintenance
Manual
To Next Page
Loading...
