4.12 Speakers 4 Replacement Procedures
Satellite/Satellite Pro/A500/A505/A507/dynabook Maintenance Manual 4-35
Installing the Speakers
Install the speakers according to the following procedures and Figure 4-16.
1. Seat the left and right speaker in the correct position.
2. Route the speaker cable in the wire guide.
3. Secure the left speaker with one M2x3 black flat head step screws.
4. Secure the right speaker with two M2x3 black flat head step screws.
5. Connect the speaker cable to CN601 on the system board.
6. Connect the LCD/FL cable to CN6 on the system board.
To Next Page
Loading...
