4 Replacement Procedures
NOTE: 1) Be careful not to apply pressure to the ICs along the edge of LCD unit. The
ICs are easily damaged.
2) For environmental reasons, do not throw away a malfunctioning LCD unit (or
FL). Please follow local ordinances or regulations for its disposal.
6. Remove the following screws securing the LCD supports and then remove them.
• M2×2.5L FLAT HEAD screw ×6
Figure 4-48 Removing the LCD supports
Satellite/Satellite Pro U500/U500D, PORTEGE M900/M900D Maintenance Manual 4-75
To Next Page
Loading...
