STE 80897
– iv –
TRANSPORTATION & INSTALLATION MANUAL
!
CAUTION
• Be sure to read through the Safety Manual provided separately before starting
actual work to assure safety of the work covering from the robot installation to
operation.
[Installation and transportation]
Be sure to observe the following items to use the robot safely.
!
DANGER
Prohibited
• DO NOT install or operate if any parts are damaged or
missing. Otherwise, electric shocks, fires or faults could be
caused.
• DO NOT install the robot where it may be exposed to splash of
liquids such as water. Otherwise, electric shocks, fires or
faults could be caused.
• DO NOT place the robot near the combustibles.
Otherwise, fires could be caused if the material ignites due to
a fault, etc.
Mandatory
• Be sure to secure the robot with the attached clamps before
carrying the robot. Otherwise, you could be involved in
injuries if the arm moves when the robot is lifted.
• Connect the robot only after installation. If wiring is
performed before the robot installation, you could be involved
in electric shocks or injuries.
• Be sure to use the master power voltage and power capacity
designated by Toshiba Machine. Otherwise, the equipment
could be damaged or catch fires.
• Be sure to use the designated power cable.
Otherwise, fires or faults could be caused.
Always ground
• Completely connect the grounding cable.
Otherwise, electric shocks or fires could be caused if a fault or
leak current occurs, in addition to malfunction by noise.
To Next Page
Loading...
