STE 80897
– 1–1 –
TRANSPORTATION & INSTALLATION MANUAL
Section 1 Transportation
1.1 Unpacking
The robot and controller are shipped separately in wooden crates and corrugated
cardboards. The packaging state of the controller is shown in Fig. 1.1.
The teach pendant and other accessories including instruction manuals are packed
separately.
Open the shipments at a location easily accessible for subsequent transport and
installation. At this time, take careful precautions not to damage the robot and
controller. After unpacking, make sure that all accessories are present and that all
equipment have not been damaged during transport.
!
DANGER
• If any parts of the equipment are found defective or damaged, or if some
accessories are missing when the robot and controller have reached your
office, DO NOT install or operate the equipment. Otherwise, the equipment
could malfunction. Contact us immediately at our sales agent in your territory.
• After unpacking, dispose of the wooden crates, corrugated cardboards,
polyethylene shipping bags and cushion materials according to your
regulations.
Fig. 1.1 Packaging state of controller
Corrugated cardboard
(outside box)
Styrene foam
cushions
Controller
Corrugated cardboard
(bottom board)
To Next Page
Loading...
