Toshiba TOSVERT VF-AS1 Series User Manual

E6581581
- 4 -
1. Overview
The EtherNet/IP™ interface (IPE001Z) allows the VF-AS1/PS1 inverter to be connected into an
EtherNet/IP™ network.
IPE001Z is applicable for VF-AS1(software version V150 or later) and VF-PS1(software version V650
or later).
2. Names and functions
The drawing below shows names and functions of main parts.
2.1. Outline
Connector to the inverter
Shielded female RJ45
EtherNet/IP Connector
(Port L）
EtherNet/IP LED indicator
(See 2.4)
Panel mounting tabs
Earth Plate
Shielded female RJ45
EtherNet/IP Connector
(Port R)
MAC address
Label

Toshiba TOSVERT VF-AS1 Series Specifications

General

Category	Inverter
Input Frequency	50/60 Hz ±5%
Series	VF-AS1
Overload Capacity	150% for 60 seconds
Input Voltage	3-phase 200 to 240 VAC
Protection Degree	IP20
Ambient Temperature	-10 to +50 °C (14 to 122°F) (Open type)
Protection Functions	Overcurrent, Overvoltage, Undervoltage, Overheating, Ground Fault
Braking Unit	Built-in
Communication	RS485
Power Range	0.4 to 110 kW
Cooling Method	Forced Air Cooling
Operating Temperature	-10 to +50 °C (14 to 122°F) (Open type)
Altitude	Up to 1000 m
Output Voltage	3-phase, voltage corresponding to input voltage