Toshiba TOSVERT VF-S15 series Function Manual

E658130
- 32 -
5.5.10. Description of reply code
When executing the frequency setting (RYnD) or instruction code execution (RYnF), check the
reply code (RWr (n+2), (n+10), (n+14), (n+16), (n+18)) in the remote register after execution.
Reply code
Data
(Hexadecimal No.)
Item Description
0000H Normal (No error)
Normal completion of instruction code
execution.
0001H Write mode error
Parameter write was attempted during operation
other than a stop.
0002H
Parameter selection
error
Unregistered code number was set.
0003H Setting range error Set data is outside the setting data range.

Toshiba TOSVERT VF-S15 series Specifications

General

Series	VF-S15
Category	Inverter
Control Method	V/f control, Sensorless vector control
Overload Capacity	150% for 60 seconds
Protection Features	Overcurrent, Overvoltage, Undervoltage, Overheat, Short Circuit
Communication Options	Modbus
Braking Unit	Built-in
Power Rating	0.4 kW to 15 kW
Input Voltage	Single-phase 200 to 240V, Three-phase 200 to 240V, 380 to 480V
Cooling Method	Fan cooling