25
Chapter 6
Network Security
3 ) Enter the Device Name and MAC Address (You can copy and paste the information
from Online Devices table if the device is connected to your network).
4 ) Click Save.
Done!
Now you can block or allow specific client devices to access your network (via wired
or wireless) using the Blacklist or Whitelist.
6. 4. IP & MAC Binding
IP & MAC Binding, namely, ARP (Address Resolution Protocol) Binding, is used to bind
network device’s IP address to its MAC address. This will prevent ARP spoofing and
other ARP attacks by denying network access to a device with matching IP address in
the Binding list, but unrecognized MAC address.
I want to:
Prevent ARP spoofing and other ARP attacks.
How can I do that?
1. Visit http://tplinkmodem.net, and log in with the password or your TP-Link ID.
2. Go to Advanced > Security > IP & MAC Binding and enable IP & MAC Binding.
To Next Page
Loading...
