123
Choose the menu Multicast→IGMP Snooping→Profile Binding to load the following page.
Figure 8-11 Profile Binding
The following entries are displayed on this screen:
Profile and Max Group Binding
UNIT:1/LAGS: Click 1 to configure the physical ports. Click LAGS
link aggregation groups.
Select: Select the desired entry for configuration.
Port: It is multi-optional. Displays the port number.
Profile ID: The existing Profile ID bound to the selected port.
Max Group: The maximum multicast group a port can join.
Overflow Action:
The policy should be taken when the number of multicast group a
port has joined reach the maximum.
Drop: D
rop the successive report packet, and this port can not
join any other multicast group.
Replace:
When the number of the dynamic multicast groups
that a port joins has exceeded the max-
group, the newly joined
multicast group will replace an existing multicast group with the
lowest multicast group address.
LAG: Displays the LAG number which the port belongs to.
To Next Page
Loading...
