Modify Interface
Interface ID: Display the ID of the in
terface corresponding to the VLAN ID,
loopback interface, routed port or port-channel.
IP Address Mode: View and modify the IP address allocation mode.
None: without ip.
Static: setup manually.
DHCP: allocated through DHCP.
BOOTP: allocated through BOOTP.
IP Address: View and modify the IP address of the interface.
Subnet Mask: View and modify the subnet mask of the interface.
Admin Status: View and modify the Admin status. Choose Disable
the interface's Layer 3 capabilities.
Interface Name: View and modify the interface name.
Secondary IP Create
IP Address: Specify the secondary IP address of the interface.
Subnet Mask:
Specify the subnet mask of the interface's secondary IP address.
Secondary IP List
Select: Select the secondary IP.
IP Address: Displays the secondary IP address of the current interface.
Subnet Mask: Displays the subnet mask of the secondary IP address.
Click Detail to display the following figure:
To Next Page
Loading...
