TP-Link JetStream T1600G-28TS - Page 75

66
Choose the menu Switching→M AC Ad dr e ss→Dynamic Address to load the following page.
Figure 5-16 Dynamic Address
The following entries are displayed on this screen:

Aging Config
Auto Aging
: Allows you to Enable/Disable the Auto Aging feature.
Aging Time
: Enter the Aging Time for the dynamic address.

Search Option
Search Option
: Select a Search Option from the pull-down list and click the
Search
button to find your desired entry in the Dynamic Address Table.
 M AC: Enter the MAC address of your desired entry.
 VLAN ID: Enter the VLAN ID number of your desired entry.
 Port: Enter the Port number of your desired entry.

Dynamic Address Table
Select
:
Select the entry to delete the dynamic address or to bind the MAC
address to the corresponding port statically. It is multi-optional.
M AC Ad d re ss
: Displays the dynamic MAC Address.
VLAN ID
: Displays the corresponding VLAN ID of the MAC address.
Port
: Displays the corresponding port number of the MAC address.
Typ e
: Displays the type of the MAC address.
Aging Status
: Displays the aging status of the MAC address.
Bind
: Click the Bind
button to bind the MAC address of your selected entry
to the corresponding port statically.