TP-Link JetStream T1600G-28TS - Page 82

73
Choose the menu VLAN→802.1Q VLAN→Port Config to load the following page.
Figure 6-5 Port Config
The following entries are displayed on this screen:

VLAN Port Config
UNIT:1/LAGS: Click 1 to configure the physical ports. Click LAGS
to configure the
link aggregation groups.
Select:
Select the desired port for configuration. It is multi-optional.
Port:
Displays the port number.
PVID: Enter the PVID number of the port.
LAG: Displays the LAG to which the port belongs.
VLAN: Click the De tail
button to view the information of the VLAN to
which the port belongs.
Click the Detail button to view the information of the corresponding VLAN.
Figure 6-6 View the Current VLAN of Port