TP-Link JetStream T1600G-28TS - Page 91

82
Figure 6-11 Create and View Protocol Template
The following entries are displayed on this screen:

Create Protocol Template
Protocol Name:
Give a name for the Protocol Template.
Frame Type:
Select a Frame Type for the Protocol Template.
Ether Type:
Enter the Ethernet protocol type field in the protocol template.
DSAP:
Enter the DSAP field when selected LLC.
SSAP:
Enter the SSAP field when selected LLC.

Protocol Template Table
Select: Select the desired entry. It is multi-optional.
ID Displays the Protocol Template ID.
Protocol Name: Displays the Protocol Name.
Protocol Type: Displays the Protocol type.
Note:
The Protocol Template bound to VLAN cannot be deleted.
Configuration Procedure:
Step Operation Description
1
Create VLAN. Required. On the VLAN→802.1Q VLAN→VLAN Config
page, click the Cre ate
button to create a VLAN. Enter the
VLAN ID and the description for the VLAN. Meanwhile,
specify its member ports and the link type of the ports.