55
Chapter 4
Advanced Functions on Web Management Page
DoS Protection can protect your home network against DoS attacks from flooding your
network with server requests. Follow the steps below to configure DoS Protection.
1. Visit http://tplinkwifi.net, and log in with your Kasa account.
2. Go to Advanced > Security > Settings > DoS Protection.
3. Enable DoS Protection.
4. Set the level (Off, Low, Middle or High) of protection for ICMP-Flood Attack Filtering,
UDP-Flood Attack Filtering and TCP-SYN-Flood Attack Filtering.
• ICMP-Flood Attack Filtering - Enable to prevent the ICMP (Internet Control
Message Protocol) flood attack.
• UDP-Flood Attack Filtering - Enable to prevent the UDP (User Datagram
Protocol) flood attack.
• TCP-SYN-Flood-Attack Filtering - Enable to prevent the TCP-SYN (Transmission
Control Protocol-Synchronize) flood attack.
• Enable Ingore Ping Packet From WAN/LAN Port or Forbid Ping Packet From
LAN Port if necessary.
5. Click SAVE .
Tips:
1. The level of protection is based on the number of traffic packets. Specify the level at Advanced > System Tools
> System Parameters.
To Next Page
Loading...
