65
Chapter 4
Advanced Functions on Web Management Page
by the router. After the dynamic IP address expires, the user will be automatically
assigned a new dynamic IP address. The default is 120 minutes.
5. Keep the rest of the settings as default and click SAVE .
Note:
1. The router can be configured to work as a DHCP Relay. A DHCP relay is a computer that forwards DHCP data between computers
that request IP addresses and the DHCP server that assigns the addresses. Each of the device’s interfaces can be configured as
a DHCP relay. If it is enabled, the DHCP requests from local PCs will be forwarded to the DHCP server that runs on WAN side.
2. You can also appoint IP addresses within a specified range to devices of the same type by using Condition Pool feature. For
example, you can assign IP addresses within the range (192.168.0.50 to192.168.0.80) to Camera devices, thus facilitating the
network management. Enable DHCP feature and configure the parameters according to your actual situation on Advanced >
Network > DHCP Server page.
4.10. 1.3. Reserve LAN IP Addresses
You can view and add a reserved address for a client. When you specify an IP address
for a device on the LAN, that device will always receive the same IP address each time
when it accesses the DHCP server. If there are some devices in the LAN that require
permanent IP addresses, please configure Address Reservation on the router for the
purpose.
Follow the steps below to reserve an IP address for your device.
1. Visit http://tplinkwifi.net, and log in with your Kasa account.
2. Go to Advanced > Network > DHCP Server page.
3. Scroll down to locate the Address Reservation table and click Add to add an address
reservation entry for your device.
4. Enter the MAC address of the device for which you want to reserve IP address.
5. Specify the IP address which will be reserved by the router.
6. Enter the desciption for this enrty.
To Next Page
Loading...
Need help?
General
