58
Chapter 4
Advanced Functions on Web Management Page
3 ) Enter the Device Name and MAC Address (You can copy
and paste the information from Online Devices table if
the device is connected to your network).
4 ) Click OK.
Now you can block or allow specific client devices to access your
network (via wired or wireless) using the Blacklist or Whitelist.
4. 8. 3. IP & MAC Binding
IP & MAC Binding, namely, ARP (Address Resolution Protocol) Binding, is used to bind
network device’s IP address to its MAC address. This will prevent ARP spoofing and
other ARP attacks by denying network access to a device with matching IP address in
the Binding list, but unrecognized MAC address.
Prevent ARP spoofing and ARP attacks.
1. Visit http://tplinkwifi.net, and log in with your Kasa account.
2. Go to Advanced > Security > IP & MAC Binding and enable IP
& MAC Binding.
Done!
I want to:
How can I
do that?
To Next Page
Loading...
