TP-Link TD-VG3631 User Giude

TD-VG3631 300Mbps Wireless N VoIP ADSL2+ Modem Router User Guide
117
Appendix D: Telephone Operation
The table below guides you to configure some frequently used call features using keypads on your
telephone. For the features mentioned in this table, please refer to Telephony Features in
Appendix C.
Code Description Usage
*20
Listen to voice
messages stored in
your USB storage
device.
Pick up the phone to dial this code and then follow the voice
prompts for the operations below:
Press 0 to listen to new messages.
Press 1 to listen to the previous message.
Press 2 to listen to the current message again.
Press 3 to listen to the next message.
Press 4 to delete the current message.
*60 Disable Call Waiting.
Pick up the phone to dial this code. After hearing the
confirmation tone, hang up to make the configuration take
effect.
*61 Enable Call Waiting.
Pick up the phone to dial this code. After hearing the
confirmation tone, hang up to make the configuration take
effect.
*62
With Call Waiting
enabled, disable it for
the call you are going
to make.
Pick up the phone to dial this code. You will hear the
confirmation tone and then the dial tone which will prompt
you to dial the destination number.
*63
With Call Waiting
disabled, enable it for
the call you are going
to make.
Pick up the phone to dial this code. You will hear the
confirmation tone and then the dial tone which will prompt
you to dial the destination number.
*99 Enable Redial on busy.
Pick up the phone to dial this code. You will hear the
confirmation tone and then the dial tone which will prompt
you to dial the destination number. If the called party is busy,
the number will be dialed again and again until there is
response. To end the dialing, hang up and then pick up your
phone.
*70
Disable all the call
forwarding features.
Pick up the phone to dial this code. After hearing the
confirmation tone, hang up to make the configuration take
effect.
*71
Enable Call Forwarding
on No Answer.
Pick up the phone to dial this code. After hearing the
confirmation tone, hang up to make the configuration take

TP-Link TD-VG3631 Specifications

General

VPN support	PPTP, L2TP, IPSec
Ethernet LAN	Yes
Cabling technology	10/100Base-T(X)
Networking standards	IEEE 802.3, IEEE 802.3u
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN interface type	Fast Ethernet
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standard	Wi-Fi 4 (802.11n)
WLAN data transfer rate (max)	300 Mbit/s
Input current	1.5 A
Input voltage	12 V
Rack mounting	No
Frequency band	2.4 GHz
USB ports quantity	2
Management platform	HTTP/Telnet/CLI/SNMP/SSL
Filtering description	MAC / IP / Packet / URL
Compatible operating systems	Windows 98SE, NT, 2000, XP, Vista, 7\\r MAC OS\\r NetWare, UNIX, Linux
Ethernet LAN (RJ-45) ports	4
DHCP client	-
Routing protocols	RIP-1, RIP-2
Antenna connector type	RP-SMA
Antenna gain level (max)	5 dBi
Security algorithms	128-bit WEP, 64-bit WEP, WPA-PSK, WPA2-PSK
Certification	CE, FCC, RoHS
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 90 %
Cables included	LAN (RJ-45), Phone (RJ-11)

Weight and Dimensions

Depth	177 mm
Width	256 mm
Height	51 mm
Weight	- g