TD-VG3631
300Mbps Wireless N VoIP ADSL2+ Modem Router User Guide
64
Figure 4-47
¾ Call Log: Check the Enable if you want to make this function take effect; otherwise check the
Disable.
¾ Start: Beginning time of the call.
¾ Source: Caller ID, either phone number or IP address.
¾ Dest: Callee ID, either phone number or IP address.
¾ Type: Call types, including Incoming (VoIP), Incoming (PSTN), Outgoing (VoIP) and
Outgoing (PSTN).
¾ Process: Process types, including Connected, Local forward, Remote forward, Local transfer,
Remote transfer, Conference and Unconnected.
¾ Time: Total call time.
To configure the view of call log, click the Config button and you will see the screen as shown in
Figure 4-48. This page displays all the call types and process types. You can choose some of
them or all of them. Check the boxes before the corresponding options which you desire to view
and click the Save button to make the configuration take effect.
Figure 4-48
4.7.7 Call Firewall
Choose “Voice”Æ“Call Firewall“, you can see the next submenus:
To Next Page
Loading...
Need help?
General
Weight and Dimensions
