TD-VG3631
300Mbps Wireless N VoIP ADSL2+ Modem Router User Guide
53
4.7.1 SIP Account
Choose “Voice”Æ“SIP Account”, you will see the screen similar to Figure 4-35. SIP accounts are
necessary for making VoIP calls. This section introduces how to setup the SIP(Session Initiation
Protocol) account for your Modem Router.
Figure 4-35
¾ Profile Name: Displays the profile name of the account.
¾ Registrar Address: Displays the IP address or domain name of the SIP Registrar server.
¾ Phone Number: Displays the phone number of the account.
¾ Status: Displays the status of the account. “Down” means that the account has not been
registered.
¾ Remove: Check the box and then click the Remove button below so that the very account
will be deleted.
¾ Edit: Click the Edit button to modify the very account.
To set up an SIP account, click the Add button in Figure 4-35. Configure the following parameters
in Figure 4-36 and then click the Save button. Then an account is added. Please note that the
blanks with red asterisk behind are required to be entered.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
