TP-Link TL-SG2216 - Show Snmp-Server; Show Snmp-Server View; Show Snmp-Server Group

Example
Configure the port of entries of 1,2 and 3 as port 2, the owners as owner1 and
the alarm intervals as 100 seconds
TL-SG2424(config)# rmon alarm 1-3 interface gigabitEthernet 1/0/2 owner
owner1 interval 100
show snmp-server
Description
The show snmp-server command is used to display SNMP configuration
globally.
Syntax
show snmp-server
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display SNMP configuration globally:
TL-SG2424# show snmp-server
show snmp-server view
Description
The show snmp-server view command is used to display the View table.
Syntax
show snmp-server view
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the View table:
TL-SG2424# show snmp-server view
show snmp-server group
Description
The show snmp-server group command is used to display the Group table.
200