TP-Link TL-SG2216 - Show Mac Address-Table Count; Show Mac Address-Table Address

port
—— The Ethernet port number.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the address configuration of port 1:
TL-SG2424(config)# show mac address-table interface gigabitEthernet
1/0/1
show mac address-table count
Description
The show mac address-table count command is used to display the total
amount of MAC address table.
Syntax
show mac address-table count
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the total amount of MAC address table:
TL-SG2424(config)# show mac address-table count
show mac address-table address
Description
The show mac address-table address command is used to display the
information of the specified MAC address.
Syntax
show mac address-table address mac-addr
Parameter
mac-addr ——The specified MAC address.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the information of the MAC address 00:00:00:00:23:00:
64