TP-Link TL-SG2216 - Show Interface Switchport

Example
Display the information of vlan 5:
TL-SG2424(config)# show vlan id 5
show interface switchport
Description
The show interface switchport command is used to display the IEEE 802.1Q
VLAN configuration information of the specified port or all ports.
Syntax
show interface switchport [port]
Parameter
port —— The port number. By default, display the VLAN configuration
information of all ports.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the VLAN configuration information of all ports:
TL-SG2424(config)# show interface switchport
25