EasyManuals Logo

Trace Engineering Legend User Manual

Trace Engineering Legend
93 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #75 background imageLoading...
Page #75 background image
APPENDIX B: OTHER PRODUCTS FROM TRACE
ENGINEERING
Trace Engineering Co. Inc. Tel (360) 435-8826 Part Number 3179
5916 195
th
Street, NE Fax (360) 435-2229 Effective August 6, 1998
Arlington, WA 98223 USA www.traceengineering.com Page
67
Appendix B: Other Products from Trace
Engineering
SW SERIES SINEWAVE INVERTER
A high power sinewave inverter/charger, the SW Series features low current distortion charger,
temperature compensation, series operation, fast transfer time, line tie capability, generator support,
generator start and user controlled auxiliary relays.
C40 MULTI-PURPOSE CONTROLLER
The C40 is a 40-amp solar charge controller, DC load controller, or DC diversion regulator. The unit
works with 12, 24, or 48 volts systems and is rated at 40-amp continuous capacity. Other features of
the C40 are field adjustable setpoints, temperature compensation and protection, electronic overload
protection with manual or auto-reset ability, optional LCD meter, and an optional temp compensation
sensor.
C12 CHARGE CONTROLLER
The C-12 is a12 amp 3 stage solar charge controller, DC load, and automatic lighting control center.
The C12 is fully protected against overload, short-circuit, and reverse polarity. It is ideal for
controlling lighting systems as it uses a PV array as an electric eye to seewhen it is dark, so it
knows when to turn on the lights! Automatic reset, battery over discharge and overcharge protection,
two-stage lightning protection and surge suppression, and optional temp compensation sensor are a
few of the features of the C12.
SW AND DR SERIES POWER PANEL SYSTEMS
Pre-assembled complete power panels featuring the SW or DR series inverters are now available.
Each panel is complete and complies with all codes (it is ETL listed). All you do is connect to the
battery and hook up AC loads. An AC system bypass allows AC loads to operate while the inverter
is locked out for servicing.
Contact your Trace Engineering dealer for details on any of the above products.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Trace Engineering Legend and is the answer not in the manual?

Trace Engineering Legend Specifications

General IconGeneral
BrandTrace Engineering
ModelLegend
CategoryInverter
LanguageEnglish

Related product manuals