BCU Operator Display Overview
2 BMTW-SVU02C-EN
Using the Touch Screen
The operator-display touch screen uses five different screen types, as well
as selection buttons and navigation buttons to view and change system
status information. The five screen types are the home screen, standard
screens, custom screens, confirmation screens, and the security screen.
Home Screen
The home screen is where each operator display task begins. It includes
five task buttons: View, Alarms, Schedule, Timed Override, and Setup
(see Figure 2). These buttons enable you to access system status informa-
tion for a particular task. Table 1 on page 3 briefly describes the function
of each button.
Figure 2: Home Screen Components
Note:
You may not have access to all of the tasks presented in this
guide. Your access privileges depend on your user profile. Con-
tact your supervisor for information.
Task
buttons
To Next Page
Need help?
General
