Trane BCU Operator Display User Manual

BCU Operator Display Overview
6 BMTW-SVU02C-EN
Operator Display Screens
The operator-display touch screen can display both standard and custom
screens, confirmation screens, and a security screen.
Standard Screens
Standard screens are a part of the Tracer Summit BCU operator display
software. (See Appendix B on page 67 for a list of standard screens avail-
able at the operator display.) Standard screens are identified by a title bar
at the top of each screen (see Figure 4). .
Figure 4: Standard Screen—Example
Custom Screens
The Trane installer or programmer can create custom screens for use at
the operator display. These screens can be used in place of standard
screens to accomodate specific user requirements at your facility. Custom
screens can be linked to standard view screens by a navigation button
(see Figure 5 on page 7).
Title bar
Note:
Navigation of custom screens is not discussed in this guide.

Trane BCU Operator Display Specifications

General

Brand	Trane
Model	BCU Operator Display
Category	Monitor
Language	English