Viewing and Changing System Status Information
20 BMTW-SVU02C-EN
8. Press Yes to confirm your changes and return to the Setpoints screen.
Overriding System Values
1. From the home screen, press the View button. The View Equipment
screen displays.
2. Using one of the sort methods, access the UCM main screen for the
equipment you want to view.
3. Press the More Details button. The More Details screen displays (see
Figure 13 on page 18).
4. Press the Manual Controls button. The Manual Control screen dis-
plays (see Figure 16).
Figure 16: Manual Control (Overrides) Screen
Note:
To clear your entry, press the Clear button. To cancel your entry
and return to the previous screen, press the Cancel button.
Note:
Some equipment may not have a UCM main screen, More
Details screen, or Unit Summary information associated with
it.
The UCM main screen may or may not have a graphic (picture
of the equipment) associated with it.
List of available
override properties for
the equipment being
viewed
Control status of property
To Next Page
Loading...
