Trane BCU Operator Display User Manual

Displaying and Editing Schedules
40 BMTW-SVU02C-EN
2. Use the keypad to enter the new time or duration. Use the AM or PM
buttons to indicate the time of day.
3. Press OK to return to the detailed events screen.
4. Press the OK Select Dates button. The select dates screen displays
(see Figure 32 on page 39).
5. Apply this change to create an exception or permanent change to the
schedule. To create an exception, see “Creating Exceptions” on
page 42. To make a permanent change to the schedule see, “Making
Permanent Changes to a Schedule” on page 45.
Adding an Event to a Schedule
To access the basic events or detailed events screen, see “Viewing Sched-
ules” on page 35.
1. To add an event to a schedule:
• From the basic events screen, press the Detailed View button.
The detailed events screen displays (see Figure 27 on page 34).
• If you are already at the detailed events screen, go to step 2.
2. Press the Add or Remove button. The Add or Remove screen displays
(see Figure 34).
Figure 34: Add or Remove Screen
Note:
If you need to clear your entry, press the Clear button. Press the
Cancel button to return to the previous screen without making
any changes.
Add button
Remove exception
button
Remove button

Trane BCU Operator Display Specifications

General

Brand	Trane
Model	BCU Operator Display
Category	Monitor
Language	English