Trane BCU Operator Display User Manual

Changing the Display Language
BMTW-SVU02C-EN 57
Figure 49: Calibration Touch Target #2
4. Again, touch the target with the object. Hold until the beeping stops.
The touch screen is now calibrated and the operator display returns
you to the Setup menu.
Changing the Display Language
You can change the language in which text is displayed on the BCU oper-
ator display.
1. From the home screen, press the Setup button. The Setup menu dis-
plays (see Figure 42 on page 51).
2. Press the Change Display Language button. The Change Display
Language screen displays (see Figure 50).
Figure 50: Change Display Language Screen
Calibration target

Trane BCU Operator Display Specifications

General

Brand	Trane
Model	BCU Operator Display
Category	Monitor
Language	English