BMTW-SVU02C-EN 51
Chapter 6
Operator Display Setup
Options
The BCU operator display setup function enables you to change BCU and
operator display system settings (see Figure 42). The setup function
enables you to:
• Set time and date
• Set the time format
• Adjust brightness
• Calibrate the operator display touch screen
• Log off from the operator display
• Change display language
Figure 42: Setup Menu Screen
Note:
You may not have access to all of the tasks presented in this
guide. Your access privileges depend on your user profile. Con-
tact your supervisor for information.
To Next Page
Loading...
