Trane Symbio 700 - Initiating Test Mode on an Odyssey Symbio Using the Onboard User Interface; To Initiate Test Mode; To Exit Test Mode

140
Initiating Test Mode on an Odyssey Symbio using the Onboard User Interface.
To Initiate Test Mode
Press the Home Button
Down Arrow to Service
Press the Check Mark
Down Arrow to Test
Press the Check Mark
Down Arrow to Service Test – DO NOT USE PREFORMANCE TEST!
Press the Check Mark
The I on Inactive flashes
Down Arrow to what you want to test
Press the Check Mark.
To Exit Test Mode
Press the Check Mark.
Up arrow to Inactive
Press the Check Mark