Trane TR200 - 20-20 Feedback Function

[48] Bus ctrl., timeout
[100] Output freq. 0-100
[101] Reference Min-Max
[102] Feedback +-200%
[103] Motor cur. 0-Imax
[104] Torque 0-Tlim
[105] Torque 0-Tnom
[106] Power 0-Pnom
[107] Speed 0-HighLim
[113] Ext. Closed-loop 1
[114] Ext. Closed-loop 2
[115] Ext. Closed-loop 3
5-65 Pulse Output Max Freq #29
Set the maximum frequency for terminal 29 corresponding to the output variable set in par.5-63 Terminal 29 Pulse Output Varia-
ble.
This parameter cannot be adjusted while the motor is running.
Range: Function:
5000
Hz*
[0 - 32000 Hz]
5-66 Terminal X30/6 Pulse Output Variable
Option: Function:
[0] * No operation
[45] Bus ctrl.
[48] Bus ctrl., timeout
[100] Output freq. 0-100
[101] Reference Min-Max
[102] Feedback +-200%
[103] Motor cur. 0-Imax
[104] Torque 0-Tlim
[105] Torque 0-Tnom
[106] Power 0-Pnom
[107] Speed 0-HighLim
[113] Ext. Closed-loop 1
[114] Ext. Closed-loop 2
[115] Ext. Closed-loop 3
5-68 Pulse Output Max Freq #X30/6
Select the maximum frequency on terminal X30/6 referring to the output variable in par.5-66 Terminal X30/6 Pulse Output Varia-
ble. This parameter cannot be adjusted while the motor is running.
This parameter is active when option module MCB 101 is mounted in the adjustable frequency drive.
Range: Function:
Applica-
tion de-
pend-
ent*
[0 - 32000 Hz]
Parameter Description
TR200 Programming Guide 4-81