Trane TR200 - Page 117

[0] No operation
[45] Bus ctrl.
[48] Bus ctrl., timeout
[100] Output frequency
[101] Reference
[102] Feedback
[103] Motor current
[104] Torque relative to limit
[105] Torque relative to rated
[106] Power
[107] Speed
[108] Torque
[109] Max Out Freq
[113] Ext. Closed-loop
[114] Ext. Closed-loop
[115] Ext. Closed-loop
5-60 Terminal 27 Pulse Output Variable
Option: Function:
[0] * No operation
[45] Bus ctrl.
[48] Bus ctrl., timeout
[100] Output freq. 0-100
[101] Reference Min-Max
[102] Feedback +-200%
[103] Motor cur. 0-Imax
[104] Torque 0-Tlim
[105] Torque 0-Tnom
[106] Power 0-Pnom
[107] Speed 0-HighLim
[113] Ext. Closed-loop 1
[114] Ext. Closed-loop 2
[115] Ext. Closed-loop 3
5-62 Pulse Output Max Freq #27
Set the maximum frequency for terminal 27, corresponding to the output variable selected in par.5-60 Terminal 27 Pulse Output
Variable.
This parameter cannot be adjusted while the motor is running.
Range: Function:
5000
Hz*
[0 - 32000 Hz]
5-63 Terminal 29 Pulse Output Variable
Option: Function:
[0] * No operation
[45] Bus ctrl.
Parameter Description
4-80 TR200 Programming Guide