Trane TR200 - Page 138

8-9* Bus Jog
Parameters for configuring the Bus Jog.
8-90 Bus Jog 1 Speed
Range: Function:
100
RPM*
[Application dependant] Enter the jog speed. This is a fixed jog speed activated via the serial port
or serial communication bus option.
8-91 Bus Jog 2 Speed
Range: Function:
200
RPM*
[Application dependant] Enter the jog speed. This is a fixed jog speed activated via the serial port
or serial communication bus option.
8-94 Bus Feedback 1
Range: Function:
0 N/A* [-200 - 200 N/A] Write a feedback to this parameter via the serial communication port or
serial communication bus option. This parameter must be selected in
par.20-00
Feedback 1 Source, par.20-03 Feedback 2 Source or par.
20-06
Feedback 3 Source as a feedback source.
8-95 Bus Feedback 2
Range: Function:
0 N/A* [-200 - 200 N/A] See par.8-94
Bus Feedback 1 for further details.
8-96 Bus Feedback 3
Range: Function:
0 N/A* [-200 - 200 N/A] See par.8-94
Bus Feedback 1 for further details.
Parameter Description
TR200 Programming Guide 4-101