Trane TR200 - Page 235

23-11 Maintenance Action
Option: Function:
Select the action to be associated with the preventive maintenance
event.
[1] * Lubricate
[2] Clean
[3] Replace
[4] Inspect/Check
[5] Overhaul
[6] Renew
[7] Check
[20] Maintenance Text 0
[21] Maintenance Text 1
[22] Maintenance Text 2
[23] Maintenance Text 3
[24] Maintenance Text 4
[25] Maintenance Text 5
23-12 Maintenance Time Base
Option: Function:
Select the time base to be associated with the preventive maintenance
event.
[0] * Disabled
Disabled [0] must be used when disabling the preventive maintenance
event.
[1] Running Hours
Running Hours [1] is the number of hours the motor has been running.
Running hours are not reset at power-on. The
Maintenance Time Interval
must be specified in par.23-13 Maintenance Time Interval.
[2] Operating Hours
Operating Hours [2] is the number of hours the adjustable frequency drive
has been running. Operating hours are not reset at power-on. The
Main-
tenance Time Interval
must be specified in par.23-13 Maintenance Time
Interval.
[3] Date & Time
Date & Time [3] uses the internal clock. The date and time of the next
maintenance occurrence must be specified in par.23-14
Maintenance
Date and Time.
Parameter Description
4-198 TR200 Programming Guide