23-53 Energy Log
Range: Function:
0 N/A* [0 - 4294967295 N/A] Array with a number of elements equal to the number of counters ([00]-
[xx] below parameter number in display). Press OK and Step between
elements by means of
Ⴃ
and
Ⴍ
buttons on the Local Control Panel.
Array elements:
Data from latest period is stored in the counter with the highest index.
At power-down, all counter values are stored and resumed at next pow-
er-up.
NOTE
All counters are automatically reset when changing the setting in par.23-50 Energy Log Resolution. At overflow the
update of the counters will stop at maximum value.
NOTE
When mounting an Analog I/O MCB109 option card, a battery backup of the date and time is included.
23-54 Reset Energy Log
Option: Function:
Select
Do reset
[1] to reset all values in the Energy Log counters shown
in par.23-53
Energy Log. After pressing OK, the setting of the parameter
value will automatically change to
Do not reset
[0].
[0] * Do not reset
[1] Do reset
4-202 TR200 Programming Guide
To Next Page
Loading...
