Trane TR200 - Page 243

NOTE
The adjustable frequency drive has no back-up of the clock function and the set date/time will reset to default
(2000-01-01 00:00) after a power-down unless a Real Time Clock module with back-up is insta
lled. Consequently,
logging will be stopped until the date/time is readjusted in par.0-70
Date and Time. In par.0-79 Clock Fault, it is possible
to program for a warning in case the clock has not been set properly, e.g.
, after a power-down.
NOTE
When mounting an Analog I/O MCB109 option card, a battery back-up of the date and time is included.
23-64 Timed Period Stop
Range: Function:
Applica-
tion de-
pend-
ent*
[Application dependant]
NOTE
When mounting an Analog I/O MCB109 option card, a battery back-up of the date and time is included.
23-65 Minimum Bin Value
Range: Function:
Applica-
tion de-
pend-
ent*
[Application dependant]
23-66 Reset Continuous Bin Data
Option: Function:
Select
Do reset [1] to reset all values in par.23-61 Continuous Bin Data.
After pressing OK, the setting of the parameter value will automatically
change to
Do not reset [0].
[0] * Do not reset
[1] Do reset
23-67 Reset Timed Bin Data
Option: Function:
Select
Do reset [1] to reset all counters in par.23-62 Timed Bin Data.
After pressing OK, the setting of the parameter value will automatically
change to
Do not reset [0].
[0] * Do not reset
[1] Do reset
Parameter Description
4-206 TR200 Programming Guide