0-31 Custom Readout Min Value
Range: Function:
Applica-
tion de-
pend-
ent*
[Application dependant]
0-32 Custom Readout Max Value
Range: Function:
100.00
Custom-
Readou-
tUnit*
[Application dependant] This parameter sets the max value to be shown when the speed of the
motor has reached the set value for par.4-13
Motor Speed High Limit
[RPM] or par.4-14 Motor Speed High Limit [Hz] (depends on setting in
par.0-02
Motor Speed Unit).
0-37 Display Text 1
Range: Function:
0 N/A* [0 - 0 N/A] In this parameter, it is possible to write an individual text string for dis-
play in the keypad or to be read via serial communication. If it is to be
displayed permanently, select Display Text 1 in par.0-20
Display Line 1.1
Small, par.0-21 Display Line 1.2 Small, par.0-22 Display Line 1.3 Small,
par.0-23
Display Line 2 Large or par.0-24 Display Line 3 Large. Use the
Ⴃ
or
Ⴍ
buttons on the keypad to change a character. Use the
Ⴑ
and
Ⴇ
buttons to move the cursor. When a character is highlighted by the cur-
sor, it can be changed. Use the
Ⴃ
or
Ⴍ
buttons on the keypad to change
a character. A character can be inserted by placing the cursor between
two characters and pressing
Ⴃ
or
Ⴍ
.
0-38 Display Text 2
Range: Function:
0 N/A* [0 - 0 N/A] In this parameter, it is possible to write an individual text string for dis-
play in the keypad or to be read via serial communication. If to be
displayed permanently select Display Text 2 in par.0-20
Display Line 1.1
Small, par.0-21 Display Line 1.2 Small, par.0-22 Display Line 1.3 Small,
par.0-23
Display Line 2 Large or par.0-24 Display Line 3 Large. Use the
Ⴃ
or
Ⴍ
buttons on the keypad to change a character. Use the
Ⴑ
and
Ⴇ
buttons to move the cursor. When a character is highlighted by the cur-
sor, this character can be changed. A character can be inserted by placing
the cursor between two characters and pressing
Ⴃ
or
Ⴍ
.
TR200 Programming Guide 4-15
To Next Page
Loading...
