Trane TR200 - Access to Control Terminals

0-39 Display Text 3
Range: Function:
0 N/A* [0 - 0 N/A] In this parameter, it is possible to write an individual text string for dis-
play in the keypad or to be read via serial communication. If it is to be
displayed permanently, select Display Text 3 in par.0-20
Display Line 1.1
Small,par.0-21 Display Line 1.2 Small, par.0-22 Display Line 1.3 Small,
par.0-23
Display Line 2 Large or par.0-24 Display Line 3 Large. Use the
Ⴃ
or
Ⴍ
buttons on the keypad to change a character. Use the
Ⴑ
and
Ⴇ
buttons to move the cursor. When a character is highlighted by the cur-
sor, this character can be changed. A character can be inserted by placing
the cursor between two characters and pressing
Ⴃ
or
Ⴍ
.
keypad, 0-4*
Enable, disable and password-protect individual keys on the keypad.
0-40 [Hand on] Key on LCP
Option: Function:
[0] Disabled No function
[1] * Enabled [Hand on] Key enabled
[2] Password Avoid unauthorized start in hand mode. If par.0-40
[Hand on] Key on
LCPis included in the My Personal Menu, then define the password in
par.0-65
Personal Menu Password. Otherwise, define the password in
par.0-60
Main Menu Password.
[3]
[4]
[5]
[6]
0-41 [Off] Key on LCP
Option: Function:
[0] Disabled No function
[1] * Enabled [Off] Key is enabled
[2] Password Avoid unauthorized stop. If par.0-41
[Off] Key on LCP is included in the
My Personal Menu, then define the password in par.0-65
Personal Menu
Password. Otherwise, define the password in par.0-60 Main Menu Pass-
word.
[3]
[4]
[5]
[6]
Parameter Description
4-16 TR200 Programming Guide