Trane TR200 - Page 58

0-76 DST/Summertime Start
Range: Function:
Applica-
tion de-
pend-
ent*
[Application dependant]
0-77 DST/Summertime End
Range: Function:
Applica-
tion de-
pend-
ent*
[Application dependant]
0-79 Clock Fault
Option: Function:
Enables or disables the clock warning when the clock has not been set,
or has been reset due to a power-down and no backup is installed.
[0] * Disabled
[1] Enabled
0-81 Working Days
Array with 7 elements [0] - [6] displayed below parameter number in display. Press OK and step between elements by means of
Ⴃ
and
Ⴍ
buttons on the keypad.
Option: Function:
Specify whether each weekday is a workday or a non-workday. First el-
ement of the array is Monday. The workdays are used for timed actions.
[0] * No
[1] Yes
0-82 Additional Working Days
Array with 5 elements [0] - [4] displayed below parameter number in display. Press OK and step between elements by means of
Ⴃ
and
Ⴍ
buttons on the keypad.
Range: Function:
Applica-
tion de-
pend-
ent*
[Application dependant]
0-83 Additional Non-Working Days
Array with 15 elements [0] - [14] displayed below parameter number in display. Press OK and step between elements by means
of
Ⴃ
and
Ⴍ
buttons on the keypad.
Range: Function:
Applica-
tion de-
pend-
ent*
[Application dependant]
Parameter Description
TR200 Programming Guide 4-21