Trane TR200 - Page 63

AMA (Automatic Motor Adaptation) is recommended. See the Automatic Motor Adaptation section. The AMA
sequence will adjust all motor parameters except the moment of inertia of the rotor and the iron loss resistance
(par.1-36
Iron Loss Resistance (Rfe)).
Par. 1-3* and par. 1-4* cannot be adjusted while the motor is running.
Figure 4. 1: Motor equivalent diagram for an asynchronous motor
1-30 Stator Resistance (Rs)
Range: Function:
Applica-
tion de-
pend-
ent*
[Application dependant]
1-35 Main Reactance (Xh)
Range: Function:
Applica-
tion de-
pend-
ent*
[Application dependant]
NOTE
This parameter cannot be adjusted while running.
1-36 Iron Loss Resistance (Rfe)
Range: Function:
Applica-
tion de-
pend-
ent*
[Application dependant]
NOTE
This parameter cannot be adjusted while the motor is running.
Parameter Description
4-26 TR200 Programming Guide